DX-35 / DX-40 crystal doors update

[Glen Zook]

An update for those interested in the DX-35 / DX-40
crystal doors.

I have 20 made and waiting for the Heath gray paint.
The provider of the paint reads this reflector and
E-Mailed me to say that it is definitely on its way.

These doors differ from the original in the following
manner:

The sheet metal used is 26 gauge instead of the
original 22 gauge.  This is due to the fact that my
hand tools do not work that well with the heavier
gauge material.  If I can obtain a small shear, later
versions may be made of the heavier material.

The originals are not painted on the back (at least
the one that is presently in my hands).  However, I am
priming both sides and putting the wrinkle finish on
the outside.  Then, will paint both sides with the
Heath gray paint.  This will protect the steel from
rust or other corrosion.

Since these are "hand made", I am checking each one on
my DX-35 to make sure that the "fit" is correct.

Again, if anyone missed the earlier posts on these
doors, the cost is $10 each plus $1.50 for postage
unless you live within the State of Texas.  Then, I
have to charge 83 cents sales tax.  That means a total
of $11.50 for each door if you live outside of the
State of Texas and $12.33 if you live inside.  If you
live outside of the USA, let me know and I'll see what
the postage charges will be.

My mailing address is

Glen E. Zook
410 Lawndale Drive
Richardson, Texas 75080

(972) 231-3987
(972) 231-5011

Thanks

Glen, K9STH

__________________________________________________
Do You Yahoo!?
Make international calls for as low as $.04/minute with Yahoo! Messenger
http://phonecard.yahoo.com/

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"