SB-221 Output measured at 115
Tom elmore
tom at TELMORE.COM
Sun Jun 24 19:56:15 EDT 2001
First of all I would like to thank everyone that replied to my question
about my SB-221 output.
I decided to do some serious testing and here are the results. I used my
KWM-2 which puts out 100
watts on all bands as the signal source and measured the output with a Bird
wattmeter and terminated the amp with a Bird dummy load. Also I should
mention that I only used 115 on the primaries and from what I learned I
would be better off running 220/240 with a dedicated circuit.
Also I am trusting that the front panel meters which are 20+ some years old
are displaying the correct voltage and current. The most I was able to get
for RF output was around 500 watts on some bands and a few times I tripped
the breaker.
80 Meters 3.7 Mhz
Amp in CW/Tune Ep Ip Line RF Output
2000 0 114 0
1850 .290 112 250
1600 .490 110 400
Amp in SSB 2700 0 114 0
2500 .310 111 250
2300 .500 108 400
40 Meters 7.1 Mhz
Amp in CW/Tune Ep Ip Line RF Output
2000 0 114 0
1900 .220 111 250
1700 .440 110 450
Amp in SSB 2700 0 114 0
2600 .310 112 250
2350 .500 109.5 500
20 Meters 14.0 Mhz
Amp in CW/Tune Ep Ip Line RF Output
2000 0 114 0
1900 .240 113 250
1700 .500 110 500
Amp in SSB 2700 0 114 0
2600 .300 112.5 250
2400 .420 110.0 500
15 meters 21.0 Mhz
Amp in CW/Tune Ep Ip Line RF Output
2000 0 114 0
1850 .290 112.5 250
1700 .460 111 350
Amp in SSB 2700 0 114 0
2500 .310 111 250
2350 .500 110 450
Thank You
Thomas Elmore
Barrow,Alaska
Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"
More information about the Heath
mailing list