DX-100 chassis plating

[Chris Kepus]

Chris Kepus
W7JPG

Eat well.  Laugh Often.

-----Original Message-----
From:   Chris Kepus [SMTP:ckepus at mindspring.com]
Sent:   Saturday, May 19, 2001 8:45 PM
To:     'Paul K. Dean'; HEATH at LISTSERV.TEMPE.GOV
Subject:        RE: DX-100 chassis plating

Check with your local chrome plating shops.  Typically, part of the chrome
replating process involves copper plating prior to the final plating
stages.  They will be able to prepare your chassis for the replating
process also.
Chris Kepus
W7JPG

Eat well.  Laugh Often.

-----Original Message-----
From:   Paul K. Dean [SMTP:wb9hgz at CHARLOTTESVILLE.NET]
Sent:   Saturday, May 19, 2001 6:09 PM
To:     HEATH at LISTSERV.TEMPE.GOV
Subject:        DX-100 chassis plating

The DX-100 is finally painstakingly "un-built".  Paint for the cabinet is
on order.  Now, it's time to go through and test all the components and
purchase new ones where necessary.  Looking forward to "building" the
DX-100 "kit".  (Maybe I should pack all the parts up in paper bags, for
effect?)

Anyway, the chassis is in very rough shape.  I'm planning on cleaning it
up, obviously, but what really needs to happen is it must be re-plated.
Anyone had this done in the past?  Any recommendations as to who does
decent work on copper plating?

Tnx es 73,
Paul, wb9hgz

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath
'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"

Listserver Subscription:listserv at listserv.tempe.gov - "subscribe heath 'name' 'call'"
Listserver Submissions: heath at listserv.tempe.gov
Listserver Unsubscribe: listserv at listserv.tempe.gov - -"signoff heath"