SB310

[Ken Dupuis Wn2Sqc]

Hi Martin. There is a cap part number C102, value of .001 to ground from
the AGC control terminal number 2, terminal 3 goes to a 4.7K resistor,
terminal 4 has a cap, number C228, value of .2 to the center pin of the
rear panel RCA MUTE jack, hope this helps, would you like a copy of the
schematic before the manual is gone? Ken

On Fri, 9 Nov 2001 11:11:51 -0600 Martin Tippin <w0akg at AEROSURF.NET>
writes:
> Ed. wonder if you could look in your manual and see what the value of
> th Cap is between the AGC control and ground? thanks.
> Martin L Tippin  W0AKG
> 140  Monarch Lane
> Branson,  MO  65616
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html