Possible solution to PC weatherproofing

[Neil Morrison]

We used to use clear nail polish for sealing trimmers etc. You can remove it
with nail polish solvent, or just peel it off.

Regards,

Neil

----- Original Message -----
From: "Charles W. Morehouse" <w4gbw at BREVARD.NET>


> Mike,
> Have an ID-5001 with the improved sensor board. Why not mask off the parts
you
> don't want to cover and just give them several heavy coats of clear
lacquer? It
> worked for me. First it will seal from moisture, is not conductive or
corrosive
> and is easy to remove for repairs. You can get it at any home center. Luck
and
> 73's.
> Wayne;
> W4GBW

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html