GB> DX-20 and Johnson Crystal Hole Plug Covers

[John Ellingson]

I was at Lowes Hardware store and on the wall was the plugs that
everyone is looking for.  It  was in many different sizes.  I don't
remember what area it was in, might have been the sliding door area.
That are less then two dollars.  All you have to do is paint them and
put a knob on them.  Seems like a cheap source to me.

John K7OSK

Glen Zook wrote:

> I have found a "cheaper" source of the hole plugs.
> Well, not cheaper but less of a minimum order.  Have
> ordered both the 2 inch plugs for the DX-20 (and
> possibly the HX-11) and the 1.5 inch plugs for the
> Johnson equipment.
>
> They should be in hand by the middle of next week.
> When they arrive, I will start production and let
> everyone know when the crystal hole plug covers are
> available.
>
> Will have a better idea as to the cost then.  Maybe a
> dollar, or two, cheaper than what I had imagined.
> But, will know when I get some finished.
>
> Glen, K9STH
>
> __________________________________________________
> Do You Yahoo!?
> Make a great connection at Yahoo! Personals.
> http://personals.yahoo.com

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html