SB-200 Breakers

[Ken Bakhaus]

The CBs in the SB200 were made by Mechanical Products of Jackson, MI where I
was Engineering Manager for many years (ret. 1998). While Mechanical is
still in business, an exact replacement for these is not available as they
were special order devices and only produced in lots of 500 or more. This
question came up a couple years ago while I still lived in Jackson and was
doing some consulting for MP. At the time I looked up the specs and noted
what might be a standard product in distribution that was quite close. Don't
remember what the answer was and it seemed to involve 10 amp CBs rather than
8 amp but my memory fails with time - hi. You might find that old answer in
the archives or maybe I can find in old records and repost.

I no longer live in Jackson and have no access to the specs.

Ken K8PAO - since 59

----- Original Message -----
From: Chuck Moore <wcmoore at IX.NETCOM.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Monday, October 22, 2001 12:38 AM
Subject: SB-200 Breakers


> I am looking for replacement 8 amp breakers for the SB-200. Anyone know of
a
> source?
>
> Chuck WD4HXG
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html