knob setscrews???

[Neil Morrison]

If you use the old trick of putting a few nuts on first to hold the screw in
a vise, and then to re-form the threads after cutting off the head, this
should work quite well.

Regards,

Neil

----- Original Message -----
From: "Needham R Williamson Jr" <Williamsonr at PBTCOMM.NET>


> If you do not need an "allen" set screw why not make one or two from a
> screw and a "dremel" tool with a cut off wheel.  Cut to length and then
cut
> a screwdriver slot.  Beats purchasing 100 to get 2.
>
> Rodger
> N4NRW

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html