DX-100 Output

[Jordan Arndt]

My DX-100 runs about 120 watts AM outpour and about 135 watts CW output...
with new finals tubes, it runs about 115 watts AM and 125 on CW even on 10
meters... 73 de Jordan...

Glen Zook wrote:

> About 100 watts carrier, maybe a little more on 80
> meters on both CW and AM.  Sometimes a little less on
> 10 meters.
>
> Heath did have a kit to add the capabilities of using
> the SB-10 SSB adapter (made for the Apache) to the
> DX-100 and DX-100B.
>
> The designation DX-100A was often "unofficially"
> applied to those DX-100 transmitters that were field
> modified (again a Heath modification kit) to replace
> the fixed capacitor loading with the 50 pf variable to
> a three section variable.
>
> Glen, K9STH
>
> --- Tom Elmore <tom at TELMORE.COM> wrote:
> >         I have a DX-100 in storage I bought a while
> > back and am thinking
> > about getting it out and using it with AM/CW. What
> > kind of output can or
> > should I expect in these modes if I remember
> > correctly it puts out about 100 watts on CW but not
> > sure about AM also I
> > believe someone may have
> > added SSB capability to it as well.
>
> __________________________________________________
> Do You Yahoo!?
> Got something to say? Say it better with Yahoo! Video Mail
> http://mail.yahoo.com
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html