HW-2036 2m

[mike bryce]

dale...

unplug the large connector that goes to the pa board. if the radio still
draws current, then one or more of the pa transistors is kaput...

good place to start looking

Mike Bryce WB8VGE
SunLight Energy Systems

http://www.seslogic.com
http://www.theheathkitshop.com

"Electricity at the speed of light"

> From: Dale KG4KZG <Accrider3 at AOL.COM>
> Reply-To: Accrider3 at AOL.COM
> Date: Sat, 12 Jan 2002 20:46:43 EST
> To: HEATH at LISTSERV.TEMPE.GOV
> Subject: HW-2036 2m
>
> Just picked one of these up today. It drawing current when the switch is off
> so there seems to be a problem. Will get a book on it Monday at our club
> meeting from a friend. My first question is any ideas and second there are
> two factory strickers inside. One being the HW-2036 and the second is
> CO-30-29. Is the second the 4 meg mod bringing it to HW-2036A specs?
> 73 Dale
> KG4KZG
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html