Problems with tube socket

[Glen Zook]

You could have a bad solder joint or a break in the
circuit board.

There is a "slight" chance that the pins in the tube
socket have become loose.  You can "tighten" these by
removing the tube from the socket and using a small
"probe" to push the pin contacts together.  Then
replace the tube and see if this "fixes" the problem.

Glen, K9STH


--- Gene Sailsbury <gsailsbury at MOBIL1.NET> wrote:

Do I have a cold solder joint or a bad tube socket.

__________________________________________________
Do You Yahoo!?
Send FREE video emails in Yahoo! Mail!
http://promo.yahoo.com/videomail/

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html