HO-10 Trouble

[MVD@MVD]

1) Sweep oscilaltor going nuts (way off frequency) due to a bad part (but
operation would not likely be normal).

2) If there are any gas tubes (OA2, OB2, etc), check 0.1 uF (max) across
them or swap tube.

Murray
----- Original Message -----
From: "Louis T. Fiore W2QFN" <W2QFN at AOL.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Wednesday, July 17, 2002 12:28 PM
Subject: HO-10 Trouble


> Hello Heath Enthusiasts,
>
> I have a Heath HO-10 that puts out a good deal of "white noise" especially
> around 75 meters. I disconnected the HV from the scope tube and it stops.
I
> am wondering if any of you have any specific help you can give me.
>
> 73, Lou
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html