Tape on Meter face.

[Larry Gauthier]

I use peanut butter. Sounds corny, but works great. No toxic chemistry.
Every household has some.

Put a little on your finger, and rub it (press hard) directly on the tape
residue. If you have lots of residue, or old residue, it may take several
applications. When it's gone, wipe the tape/peanut butter slime off with a
damp paper towel.

-larry
K8UT
----- Original Message -----
From: "Neil Morrison" <neilsmorr at hotmail.com>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Tuesday, July 23, 2002 8:06 PM
Subject: Re: Tape on Meter face.


> I've always used kerosene to remove old baked adhesive. It's slow,
> but it's relatively safe and effective. As usual, try a test first.
>
> Regards,
>
> Neil
>
> ----- Original Message -----
> From: "M. Kassay" <mkx at SYMPATICO.CA>
>
>
> > >
> > >
> >
> > Hi All,  I have used Goo Gone, and it never seems to work for me !!
> Go
> > figure....  :)
> >
> > ....
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html