In need of diodes for the SB-610

[Diane Swynar]

Jim...

Those shouldn't be all that hard to replace, what with the wide variety of
diodes available (cheap!) on the market these days...

Even if you have to put several in series in replace the one (to SAFELY
handle 2 KV), the current capacity would be MORE than satisfied by whatever
you might choose, I'm sure.

Take a look at the power supply chapter in ANY edition of UNDERSTANDING
AMATEUR RADIO for a more practical read on these basics...

~73~ Eddy VE3CUI - VE3XZ





> Hello all,
>
> I have the SB-610 monitor. Recently, the unit decided to break down on
> me. It appears that both diodes (57-52) burned up. These diodes are
> 2000Vdc, at 5ma. In researching for replacement's. It appears that none
> are available on the market.
>
> Does anyone have any that I might be able to purchase? Or know where I
> can buy them? Thank you in advance.
>
> Cheers!
> Jim K7QI
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH To post -
> HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html