SB-620 Scanalyzer with SB-303 Receiver

[Peter A Markavage]

Depends on the IF components in the SB-620, and when I used my 620 with a
solid state IF, I had to build a voltage amplifier to get enough signal
into the 620.
Pete, WA2CWA

On Mon, 25 Nov 2002 13:24:59 -0500 Eric Pierce <eric_pierce at SYMPATICO.CA>
writes:
> I am wondering if anyone has ever tried using a SB-620 Scanalyzer
> with
> SB-303 Receiver? The 620 manual I have does not specifically mention
> it.
>
> I would imagine that I could tap into the drain of the 2nd mixer,
> Q204
> starting with 7.5 pico farads.
>
> Thinking of using RG-174U or RG-58 for the coax.
>
> Comments?
>
>
> Thanks
>
> Eric Pierce VA3EP
> www.thirdpla.net
>
>
> p.s. thanks for all those that supplied good tips on cleaning
> permanent
> marker from the front of an SB-200. Still have not got up the nerve
> to
> try it.
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html