Have another Cantenna question

[Neil Morrison]

I see Globar make these:  http://www.globar.com/resistors.html

What's the practicality of using an overwind to the resistor to buck
out the inductance of a regular W/W?

Neil

----- Original Message -----
From: "Dan Pividal N4VET" <OTAKEBI at AOL.COM>


> Seems that with my meter set at Rx1 I get no meter movement at all.
> I checked my meter against a good 50ohm R and I get 50 ohms.
> I am going to check the parts in the Cantenna but is it worth to
fix it or
> just buy a new load?
> I would not think the parts are to be found in Tampa.
> Thanks,
> Dan

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html