Kenwood lid fastener doo-dad

[Kenneth Laine Ketner]

Greetings devotees of hot tungsten:
    Got a nice set of Kenwood Twins R/T 599D. They lookin good and
workin good, got a couple of those Japanese 6146s (fed by a 12BY7) in
the otherwise all solidstate circuits. I see this format as the last
commercial gasp of the boatanchors. Only beauty item I need to finish
the restore job is a couple of the little plastic insert dingers that
hold the top lid down. They are about 1/2 inch long, and about 3/16 in
diameter. One part clicks down into the lid hole. There is a little
plunger in the doo-dad, when plunger is up one can raise the lid, and
plunger down locks the lid down. Made out of black nylon-looking
plastic.  I haven’t tried Kenwood on the hypothesis that they have never
answered me before on stuff like this.
    Would be nice once and fer all to find the nomenclature and a source
for these whatchamacallits, so I am asking the experts. Would it be
something like
    1 each xyuoi-34890cd LID MANAGEMENT FIXTURE/bl nylon, metric hole

73

--

Ken Ketner
ARS KA5ELD (Extra Class)
  Personal Webpage: http://www.wyttynys.net
  Office Webpage: http://www.pragmaticism.net
Email:
 home: ketner at arisbeassociates.com
 office: b9oky at ttacs.ttu.edu

US MAIL
PO Box 65135
Lubbock, TX 79464

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html