Kenwood lid fastener doo-dad

[Dave Fouchey]

Ken these what you looking for?

http://www.dzus.com/push/dzpush.html


Dave
WA4EMR

At 12:47 PM 10/27/02 -0600, Kenneth Laine Ketner wrote:
>Greetings devotees of hot tungsten:
>    Got a nice set of Kenwood Twins R/T 599D. They lookin good and
>workin good, got a couple of those Japanese 6146s (fed by a 12BY7) in
>the otherwise all solidstate circuits. I see this format as the last
>commercial gasp of the boatanchors. Only beauty item I need to finish
>the restore job is a couple of the little plastic insert dingers that
>hold the top lid down. They are about 1/2 inch long, and about 3/16 in
>diameter. One part clicks down into the lid hole. There is a little
>plunger in the doo-dad, when plunger is up one can raise the lid, and
>plunger down locks the lid down. Made out of black nylon-looking
>plastic.  I haven’t tried Kenwood on the hypothesis that they have never
>answered me before on stuff like this.
>    Would be nice once and fer all to find the nomenclature and a source
>for these whatchamacallits, so I am asking the experts. Would it be
>something like
>    1 each xyuoi-34890cd LID MANAGEMENT FIXTURE/bl nylon, metric hole
>
>73
>
>--
>
>Ken Ketner
>ARS KA5ELD (Extra Class)
>  Personal Webpage: http://www.wyttynys.net
>  Office Webpage: http://www.pragmaticism.net
>Email:
> home: ketner at arisbeassociates.com
> office: b9oky at ttacs.ttu.edu
>
>US MAIL
>PO Box 65135
>Lubbock, TX 79464
>
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html