SB-200 Problem

Mark Graalman WB8JKR wb8jkr at JUNO.COM
Fri Feb 14 19:19:39 EST 2003


  You would be very wise to replace all six.

Mark  WB8JKR


On Fri, 14 Feb 2003 17:53:35 -0600 "Carlos Avellanet [kf4rrn]"
<kf4rrn at COX.NET> writes:
> Hi gang, thanks for all the inputs on my SB-200 problem specially to
> Ray,
> Mark, David, and Ed.   I was off work today and had time to play.
> Three of
> the 6 power supply capacitors were dead shorts.  I checked all of
> the diodes
> and they are all good.  The six bleeder resistors however, range
> from 17 to
> 23K.  No a single one close to the 30K rating.  I am going to do a
> search on
> the net next to try to find some replacements.  The caps I already
> ordered
> from Bill.
>
> I'll keep you all posted in hopes that my experience will benefit
> others in
> the same boat.
>
> Thanks,
> Carlos KF4RRN
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html




More information about the Heath mailing list