SB-200 Problem

[rayfri]

Carlos:
If you cant find reasonably priced bleeders, I wouldnt worry about it.  They
really arent that critical a component.  When I fixed the sb 200 for my friend,
I did not measure or replace the bleeders at all.  I was talking to him last
night, and he informed
me that the sb 200 we worked on is putting out 600 watts without breaking a
sweat.
Ray


"Carlos Avellanet [kf4rrn]" wrote:

> Hi gang, thanks for all the inputs on my SB-200 problem specially to Ray,
> Mark, David, and Ed.   I was off work today and had time to play.  Three of
> the 6 power supply capacitors were dead shorts.  I checked all of the diodes
> and they are all good.  The six bleeder resistors however, range from 17 to
> 23K.  No a single one close to the 30K rating.  I am going to do a search on
> the net next to try to find some replacements.  The caps I already ordered
> from Bill.
>
> I'll keep you all posted in hopes that my experience will benefit others in
> the same boat.
>
> Thanks,
> Carlos KF4RRN
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html