SB-200 Problem

[Greg Miller]

 Carlos,
     You could also check into the Harbach power supply fiter cap
 replacements at www.harbachelectronics.com.  It looks like the site is
 closed but will reopen Feb. 20th.  They look like they'd be the easiest way
 to go.  The filter cap board comes with the caps, resistors and diodes.

     - Greg K2GTM


> > >
> > > "Carlos Avellanet [kf4rrn]" wrote:
> > >
> > > > Hi gang, thanks for all the inputs on my SB-200 problem specially to
> > Ray,
> > > > Mark, David, and Ed.   I was off work today and had time to play.
> Three
> > of
> > > > the 6 power supply capacitors were dead shorts.  I checked all of
the
> > diodes
> > > > and they are all good.  The six bleeder resistors however, range
from
> 17
> > to
> > > > 23K.  No a single one close to the 30K rating.  I am going to do a
> > search on
> > > > the net next to try to find some replacements.  The caps I already
> > ordered
> > > > from Bill.
> > > >
> > > > I'll keep you all posted in hopes that my experience will benefit
> others
> > in
> > > > the same boat.
> > > >
> > > > Thanks,
> > > > Carlos KF4RRN
> > > >

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html