DX60 Audio

[Mark Graalman WB8JKR]

     Hi Bob,

  On my DX-60B I changed C30 to a .005 ufd, C31 to a .01 ufd
 and connected a series combination of a 1 meg 1watt  resistor
and a .05 ufd 1KV cap from V5 pin 3 to V4 pin 9, change C17
to a .001 ufd. Then I set the mic gain using a scope.
I get very good reports using a Shure 450 mic.


73,  Mark  WB8JKR


On Sat, 11 Jan 2003 20:01:19 -0600 Bob Peters <soundimp at POBOX.COM>
writes:
> Hi Guys and Gals...I  understand that there are some great audio mods
> that
> can be  done to the DX60 to make it sound
> terrific.   I found the WC3K audio mod but understand there are
> others.  Talked to a 0  a few weeks ago that sounded
> fantastic...  Any Help????  Have a really  nice DX60  on the way  B
> model....
>
> Best 73's   Bob K1JNN/5
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html