Plate Metering Resistor

[Misic, George J.]

To use this technique, it is necessary to start with a resistor that is
LOWER in value than the needed resistance.  73.

George KE8RN


On Mon, 13 Jan 2003 10:35:38 -0500 Bernie Murphy
<bernard.murphy at SYMPATICO.CA> writes:
> If you are stuck, I have heard of taking a stock resistor that has a
> slightly higher value and then removing some of the carbon composite
> with a
> fine file (in the center of the resistor) until you obtain the
> exact
> resistance.

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html