Raspy audio in SB102

Mark Graalman WB8JKR wb8jkr at JUNO.COM
Thu Jun 26 12:58:37 EDT 2003


  Look at my article in the Feb 2003 issue of QST and do the
BFO, product detector, and I.F. mods. That will correct your
problem.

Mark  WB8JKR


On Thu, 26 Jun 2003 08:34:09 -0700 Greg Anders <kg6yv at MINDSPRING.COM>
writes:
> I'm bringing up an SB102 and notice that the receive audio is
> noticably raspy.  Has anyone ever seen this in
> the SB100/101/102 or HW series of transceivers.  The audio tubes
> have already been swapped out with no change.
> I'm thinking it could be something around the audio tubes or an AVC
> problem.
>
> Any ideas or experiences with this issue?
>
> Thanks,
>
> Greg
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html




More information about the Heath mailing list