[AMRadio] Heathkit TX-1 Help...

[manualman at JUNO.COM]

Sounds like you have a panel that was originally targeted for the RX-1
receiver. Both of my Apache's do not have an extra hole to the left of
the spotting switch. Does the hole have a printed designation?? See
attachments directed to you.
Pete

On Wed, 28 May 2003 14:26:16 -0600 Jordan Arndt <jordana at nucleus.com>
writes:
> Hi..Can someone provide any info on why and when Heath produced a
> TX-1
> that had an extra hole on the front panel, approx 2 1/4" on center
> from
> the Spotting Switch..? It is at the same horizontal height also...it
> has
> to be original, as the inside of the hole also has the same paint as
> the
> fron panel, and the panel finish is original....The extra hole lines
> up
> with the hole in the front sub panel , that is just in front of the
> VFO
> coil case....Has anyone else seen this..?  73 de Jordan....

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html