[Heathkit] Heathkit TX-1 Help...

rayfri rayfri at NETWORLD.COM
Wed May 28 21:14:07 EDT 2003


That's interesting...  I have TWO tx-1 transmitters and neither of them
have the extra hole...
ray   wa7itz


dlarson wrote:

>Hi Jordan.  My TX-1 has the same holes.  I believe mine is an early
>model as it has a 6AL5 bias rectifier tube.  I got a manual from
>Pete the Manual Man and it shows a couple of selenium rectifiers for
>the bias supply. Pictures in the manual doesn't show the holes.  I
>put a 1/2" plug in the hole in mine. Looks ok but wish the hole wasn't
>there.
>73
>Dave WB0TSR
>On Wed, 2003-05-28 at 15:26, Jordan Arndt wrote:
>
>
>>Hi..Can someone provide any info on why and when Heath produced a TX-1
>>that had an extra hole on the front panel, approx 2 1/4" on center from
>>the Spotting Switch..? It is at the same horizontal height also...it has
>>to be original, as the inside of the hole also has the same paint as the
>>fron panel, and the panel finish is original....The extra hole lines up
>>with the hole in the front sub panel , that is just in front of the VFO
>>coil case....Has anyone else seen this..?  73 de Jordan....
>>
>>
>>
>
>-----------------------------------------------------------
>This list is a public service of the City of Tempe, Arizona
>-----------------------------------------------------------
>
>Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
>To post - HEATH at LISTSERV.TEMPE.GOV
>Archives - http://interactive.tempe.gov/archives/HEATH.html
>
>
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html




More information about the Heath mailing list