OT: Substitute Transformer?

[pjhend@ameritech.net]

Hi Folks,
Slightly off topic, but I am having a hard time locating a Power Supply for
a Hammarlund Super Pro (series 200) receiver. I've decided to homebrew a
power supply for it if I can't locate one soon. But I cant't find out what
model transformer was used and what voltage-current ratings are needed for
the high voltage winding. There are 2 separate low voltage windings: 5v for
the 5Z3 HV rectifier, 6.3v for the receiver tubes, and 5v(?) off a tap from
the high voltage winding for the 80 rectifier tube supplying grid bias for
the set. I don't know the current requirements for these as well. Any help
you can give me would be appreciated. I know that AES has a number of
transformers that might work if I knew the correct requirements. Thanks for
your help!
73
Paul

--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html