LMO

[Stu Lyon]

No! The 401 LMO has a tube and requires ~150 VDC and 6.3 VAC whereas the 303
has only 12 VDC at relatively low current. Also the  mounting arrangement is
differant.

73, Stu W6CUX
Winnetka, CA
s.d.lyon at earthlink.net

----- Original Message -----
From: "Dale Jones" <aa7xx at SIPNSEARCH.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Friday, November 21, 2003 10:23 PM
Subject: LMO


> Will a LMO taken out of a SB 401 work in in a SB 303
>
> Has anyone had any experience with "Superfilter MK-II , CW filter. This
> filter was designed by Signal Mangement Science, Long Green, Maryland
> around 1976. This filter was designed to work in the HW-100 and the SB
line
> series.
>
> Thanks Dale AA7XX
>

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html