SB102/101

[Jim Simmons, kf4tun]

Easy way, go back to the hardware store and get the next size larger set
screw. Then get a self taping machine screw of the same size and use it to
cut out, enlarge and tap, the plastic fitting. If the plastic thing (that
thing with the set screws) had minor cracking around the set screw holes,
fill those cracks with a super glue of some type. Use only a bit, just
enough to fill the cracks. I have did this on a couple hw-101 and a sb-102,
it works and you can still take everything apart if needed.


Jim, kf4tun


----- Original Message -----
From: "ELWOOD TURNER" <w3ceb at MSN.COM>
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Thursday, September 04, 2003 8:38 AM
Subject: SB102/101


> Hello all:
> the shaft of the final tune/load knob goes into a plastic piece with two
set
> screws  that connects
> the shaft to the variable capacitor.   one of the set screws is stripped.
> Where do I get a
> replacement? A lot of people yesterday helped me out with the drive
> belts---never expected to
> strip this part while replacing the belts.    Thanks  WOODY
>
> _________________________________________________________________
> Get a FREE computer virus scan online from McAfee.
> http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.512 / Virus Database: 309 - Release Date: 8/19/03

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html