Minimum test and alignment equipment for test bench.....

[Glen Zook]

Besides a good set of hand tools!

Signal generator with a calibrated attenuator (i.e.
URM-25 series, TS-497 series, HP-606, HP-608, etc.).

Audio generator (i.e. HP-200 series, HP-204 series)

Digital multimeter

Analog VOM (i.e. Simpson 260)

Wattmeter (i.e. Bird 43)

Dummy load (at least 150 watts)

Alignment tools

Deviation monitor (if working on FM equipment)

Good oscilloscope

Frequency counter (to at least 600 MHz)

GDO ("Grid Dip Oscillator")

Soldering gun (100/150 watt, etc.)

Soldering iron (40 to 50 watt)

Soldering pencil

A service monitor is much more expensive, but will
take care of the signal generator, deviation monitor,
frequency counter, and possibly the audio generator.

A dummy load/ wattmeter is convenient (i.e. Bird 6154)

A general coverage receiver is handy to have nearby to
listen to the signal, etc.

Other than that, you will "discover" things that make
your particular situation easier.

Glen, K9STH

--- wb7tne at COMCAST.NET wrote:

I have a question about what you might think would be
at minimum,required equipment for a home rf test
bench. I do occasionally work on smt,but mostly older
solid state and tube gear.

=====
Glen, K9STH

Web sites

http://home.comcast.net/~k9sth
http://home.comcast.net/~zcomco

__________________________________
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway
http://promotions.yahoo.com/design_giveaway/

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html