DX - 40- No Plate Current

[Glen Zook]

Sounds like a bad connection to the meter switch or
the meter switch itself.  The meter shunt is probably
OK since the transmitter is putting out power.

Remember, the meter reads cathode current and NOT
plate current.  You need to check the wiring to the
meter.

Glen, K9STH


--- "] Anonymous" <sbvoigt at ADELPHIA.NET> wrote:

Problem: No plate current. When meter switched to
"plate" detect small negative deflection.

=====
Glen, K9STH

Web sites

http://home.comcast.net/~k9sth
http://home.comcast.net/~zcomco

__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free web site building tool. Try it!
http://webhosting.yahoo.com/ps/sb/

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html