6146 finals

[Glen Zook]

So long as both are not 6146B tubes you shouldn't have
any problems.  You can safely mix a 6146 with a 6146A.
 The brands don't really matter.  In fact, a lot of
the various brands came off of the same production
line!  They were just stamped with different brand
names.  However, NEVER mix a 6146 or 6146A with a
6146B.  That is asking for all sorts of problems!

Also, most SB-102 (not sp-102!) transceivers are not
that "happy" with the 6146B.  Some will work OK, but
most have problems with neutralization and the final
amplifier tubes often "run away" and put out all sorts
of parasitic emissions.

For the article on the 6146 family of tubes that was
in Electric Radio two years ago, go to either of the
websites listed at the end of this message.

Glen, K9STH


--- kevin smith <kev9255 at HOTMAIL.COM> wrote:

hi everyone,i have a sp-102 with weak finals,i picked
up some good pulls, as anyone put a westinghouse and a
sylvania togeter,any input on this..

=====
Glen, K9STH

Web sites

http://home.comcast.net/~k9sth
http://home.comcast.net/~zcomco

__________________________________
Do you Yahoo!?
Yahoo! Finance: Get your refund fast by filing online.
http://taxes.yahoo.com/filing.html

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html