HG-10B Help!

[Stephen King]

Thanks to all who helped with my question regarding the cable to the DX-60B.

Now, a new issue!  I am not able to locate the signal from the VFO on my
receiver.

Here is what I am doing ...

HG-10B is connected to power on the DX-60B.
There is no connection between RF-OUTPUT on the HG-10B and the VFO INPUT on
the DX-60B.
Receiver has no antenna hooked up, in CW mode, tuned to 7000 kHz.
VFO is about 1 foot from the receiver.
DX-60B is in TUNE.
HG-10B is in SPOT, BAND is on 40, FREQUENCY is on 7.0.

I tune the receiver around and do not hear any signal...

I checked the voltages from the schematic and all seems to be in order.  I
noticed that the VR tube does not light up or get warm, but I am getting the
proper voltage off of pin 5 of the OB2.

It sounds like the vfO is not O'ing ...

ANY help or suggestions would be GREATLY appreciated!

Peace
Stephen
W3SMK

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html