HW-101 and D-104

[Stu Lyon]

Jim,

This is very straight-forward. Connect the audio line to pin 1 of the
two-pin plug and the PTT line to pin 2. The shield (which is also the PTT
return) is soldered to the plug spring. Put the battery back in

I have used both the amplified and non-amplified D104 with the SB-101,
HW-101 and SB-401 with good results.

73, Stu W6CUX

----- Original Message -----
From: "James Cundiff" <dadofpetie at STARPOWER.NET>Jim,
To: <HEATH at LISTSERV.TEMPE.GOV>
Sent: Saturday, January 24, 2004 4:23 PM
Subject: HW-101 and D-104


> Hello All,
>     I have an Astatic D-104 and an HW-101. I need the wiring info to get
> these two together. The D-104 is a Silver Eagle that worked with my IC
746.
> The plug has been removed as has the battery in the base. The HW-101 has
the
> original style 2 pin mic jack. Any help would be appreciated. Thank you.
73.
>
> Jim Cundiff KB3GFC
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html