SB-200 meter

[The Heathkit Junkie]

To me there might be two problems. First the meter might be missing the right stop. If missing you can very easly make a stop for it.

Second, if the meter is "slamming" to the right, I would suggest looking at the three resistors from the underside of the power board to the meter. I believe it should be around 14.6 Mg in total. look it up in the manual. They have a tendency to move all over the place.

If the meter reads correctly for other readings, the meter is OK.

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html