interesting observation

[Mark Graalman WB8JKR]

 Yep, that's the way it is. But in normal
tuning it never has to be turned that far,
if it does, then the alignment is off.

Mark  WB8JKR


On Fri, 30 Jul 2004 09:44:35 -0600 Ray Friess <rayfri at HIGHSTREAM.NET>
writes:
> Has anyone else ever noticed that in an SB 400/401 that if you turn
> the
> drive control all the way clockwise, the rotor
> plates of the capacitor will touch the cover over the driver and het
> osc
> coils?
> Is this supposed to be that way... or was it a design error by
> Heath?       I assume if they touched while tuning
> up, all drive would be lost because the plates would short to
> ground....
> Ray  wa7itz
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not
> responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html