output transformers measurement. Off topic?

[Mark S Graalman]

  Using 60 hz at about 1 volt on the secondary and measuring the
primary will give you the turns ratio, the Z ratio would be the
square root of the turns ratio.

Mark  WB8JKR


On Fri, 19 Mar 2004 17:21:28 -0800 Murray Grandy <mgrandy at TELUS.NET>
writes:
> Does anyone know of test equipment that will determine the impedance
> of
> output transformers. Did Heath make any such thing. I have a bunch
> of
> unmarked transformers and would like to know what they are. I'm
> talking
> about the primary, primarily. Hi Hi.
> Murray
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not
> responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control -
> http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://interactive.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://interactive.tempe.gov/archives/HEATH.html