HR-10B

[Terry England]

Hello I have a HR-10B that quit working. First it had a bad solder joint  and 
a cap not hooked up on tube 6be8. Fixed those and it took off working. I  
turned it off put it on shelf and when I got it back out to hook up to my DX-60B  
it don't work again. Now it has two of the tubes don't light the 6ea8 and 
6bz6 I  don't have the manual out so can't give the tube socket number. but they 
are the  two on the right side as you look at them from the front. I have 
looked at these  two tubes sockets and can't find anything loose or bad solder 
joints. Think  maybe they have lost a ground to those two sockets but not sure? 
Tubes check  good in checker. Any help please want to get back on AM. Tnx  w9cau

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html