sb-110

[Glen Zook]

Tighten all of the machine screws that go through the
chassis (especially the ones holding the circuit
boards in place).  Also tighten up all of the nuts,
etc., that go through the chassis, this includes those
holding the RCA jacks on the back of the unit.

Remember, all of the grounds in the unit are made
through these and they come loose and/or build up
corrosion over the years.  Tightening them makes all
of the grounds "good" again.  I "fix" between 90% and
95% of the "screwball" or intermittented problems in
boat anchor equipment by doing this.

Glen, K9STH

--- Ron McMurray <boballan at INTERLINKLC.NET> wrote:

have an sb110, no transmit in sideband but ok in tune
and cw.tubes test ok. alc pegs meter. once in a while
it works ok.but not very often. measure -80 on alc
wires when it should have .4. any suggestions.

Glen, K9STH

Web sites

http://home.comcast.net/~k9sth
http://home.comcast.net/~zcomco

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html