Wagging DX-35 Meter

[GPBATEY]

Tony

When I built my DX-100 many years ago I had the same problem.  

I would bet that one of the hairsprings inside the meter have become 
unsoldered from its stationary point  and source of current. When the
pointer swings up
it breaks the current and it drops back till it makes again and it all
starts over...
 If you can disassemble the meter a touch with the soldering iron should
fix it.  

Let me know if it works.

Gordon WA4FJC

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html