Connection

[Peter A Markavage]

Do you have the soft key installed for the SB-200 relay or some other
circuitry that interfaces with the -130 volts to convert it to some low
voltage that most solid-state rigs can handle?

Pete, wa2cwa

On Sun, 13 Aug 2006 15:36:03 -0400 Paul Gondos <pgondos at HOTMAIL.COM>
writes:
> Hi:
>   I'm trying to connect my TS850s to my SB200 Amp. I have the LINEAR 
> AMP 
> switch ON. The REMOTE  connector is connected to the ANT RELAY on 
> the SB200. 
> The relay will not kick in when I hit the foot switch on my mic. Any 
> help 
> appreciated. Thanks.
> 
> Paul Gondos, KA3JOI.
> pgondos at hotmail.com

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html