[Heathkit] SB-201 to SB-200 conversion

[jeremy-ca]

A conversion kit was offered by Heath and the instructions were on a single 
sheet of paper.
Not a 5 minute job as the complete bandswitch has to be removed and SB200 
wafers and coils installed. You may be better off buying a SB200.

Id be interested in buying it for a 6M conversion.

Carl
KM1H


----- Original Message ----- 
From: "TChesek at Epix.Net" <tchesek at epix.net>
To: <Heathkit at mailman.qth.net>; <HEATH at LISTSERV.TEMPE.GOV>
Sent: Tuesday, December 19, 2006 10:58 AM
Subject: [Heathkit] SB-201 to SB-200 conversion


When Heathkit changed their SB-200 to the SB-201 to conform with FCC rules 
did Heathkit offer an upgrade kit to add 10 meters to the SB-201, and if so 
does anybody have the manual for the conversion?

73,
Tom K3TVC
_______________________________________________
List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com **
$$ See the vintage area on the HCI web site - http://www.w9wze.org $$
Heathkit mailing list
Heathkit at mailman.qth.net
http://mailman.qth.net/mailman/listinfo/heathkit

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html