SB-400 Loading Capacitor needed

[Michael Waldrop]

Evening Everyone,
   
  I'm in need of an SB-400 final loading variable capacitor. The Heathkit P/N is #26-92, 3 section variable 245, 245, 354 uuf. I need one in good shape. The one in my SB-400 has a failed front bearing which most likely was caused by the builder installing the dial string too tight. This causes the capacitor to short.
   
  I believe the HW-100 and 101 plus the SB-100, 101 and 102 used the same loading capacitor. Of course it must have the extended shaft to attach to the adjusting ring.
   
  If you have one please provide price including shippng to zip code 74953.
   
  Thanks.
   
  73's,
   
  Mike
  W5RKL
   

 		
---------------------------------
How low will we go? Check out Yahoo! Messenger’s low  PC-to-Phone call rates.

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html