HO-10 Monitor Scope transformer

[Tom Chesek]

As suspected the transformer in my HO-10 monitor scope is bad. The high voltage winding is open. There is no short to ground at this point but if I apply power it heats up and starts to smell, therefore I assume if I left it powered on it would eventually cook off all of the insulation and short to ground. I am not interested in spending a lot of money to have the transformer rewound. Physically this scope is very nice, so I want to fix and use it myself.

I know it is asking for unobtainium but does anyone have an HO-10 or HO-13 transformer that you are willing to part with? Second choice would be a SB-610 or SB-620 transformer. If not I will have to proceed with fabricating an external supply. Is anyone else running one of these scopes with an external supply and if so what is your configuration?

73,
Tom K3TVC


-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html