Looking for a couple of feet of multiwire cable for SWAN 350/117 PS to Transceiver cabling

[Bob and Bettina Groh]

Working on a SWAN 350 and 117XC combo and I need a couple of feet of the 
multi-wire cable that goes between the power supply and the transceiver. I can 
fabricate one from individual wires if need be but would prefer to have a 
jacketed cable if possible.

Specs: need either 8 or 10 wires (or more)in the cable, good insulation (some of 
the wires carry the +800V) and maybe #20 AWG or thereabouts. Length - 3 feet or so.

I have found a source for the 12-pin Jones plug but if one is available, I sure 
wouldn't mind getting one of those!

Thanks for any help.

73
Bob, WA2CKY

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html