Coax Switching

DavidGriffin davidgriffin at CISBEC.NET
Mon Jan 8 23:47:16 EST 2007


You know, I always do that but I'm unsure it if helps because I don't 
think the first FET cares what band the rest of the radio is tuned to.  
What do  you think?
Dave

Dick KF4NS wrote:
> One thing that was not mentioned here but would help considerably is, 
> in addition to the level  of  isolation, tune the unused radios to  
> another band or at least detune them (if  boatanchors) or select the 
> opposite end of the band.
>
> 73, Dick KF4NS
> St Petersburg, FL 33714
> Keep The Glow!
>
>> -----Original Message-----
>> From: Heathkit Owners and Collectors List
>> [mailto:HEATH at LISTSERV.TEMPE.GOV]On Behalf Of Bernie Arcand
>> Sent: Saturday, January 06, 2007 5:20 PM
>> To: HEATH at LISTSERV.TEMPE.GOV
>> Subject: Coax Switching
>>
>>
>> Hi guys...
>> I have a Heathkit Coax switch that I built decades ago, and now
>> that I have two rigs, I have the output of both of these rigs
>> into the switch, with the common port the output to the
>> tuner/antenna.  Question:  Is there a possibility or potential or
>> likelyhood that by transmitting on one radio, that I can damage
>> the receive on the other radio when it is turned off?  Would I
>> decrease the likelyhood of damage if I turn on the RF attenuator
>> on the unused rig before I turn it off?  I realize the safest way
>> is to disconnect the coax and terminate it into a 50 ohm
>> load...but don't want to do that.  Simply want to switch between rigs.
>>
>> I don't know if I was just used to the dimished receive
>> capability ion my Kenwood TS830S and didn't realize it until I
>> compared it to the Kenwood TS-430S, which is super hot!
>>
>> Just wondering what your opinions are...any and all...but rest
>> assured, I'm not trading my Kenwoods for a /\/\.
>>
>> Bernie in ND
>> WD0GMD
> Joseph Hurd, AF6G
>
> jehurd at darrcam.com
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> -----------------------------------------------------------
> Products bought, sold or traded here is the responsibility of the
> parties involved.  This list and the City of Tempe are not responsible
> for losses or misrepresentations of any kind.  Buyer beware!
>
> -----------------------------------------------------------
> This list is a public service of the City of Tempe, Arizona
> -----------------------------------------------------------
>
> Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
> To post - HEATH at LISTSERV.TEMPE.GOV
> Archives - http://listserv.tempe.gov/archives/HEATH.html
>

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html




More information about the Heath mailing list