HW 101 works great...except...Low B+ wrong.

[Kenneth G. Gordon]

On 24 Jan 2007 at 20:02, W5EUQ wrote:

> out. Low voltage is 240VDC on receive and 222VDC on transmit with 32
> watts out.

OK. Your power supply is either set up for 250 VDC low B+ or the 
switch (if you have one) is in the wrong position.

Low B+ should be 300 VDC for the HW/SB-100/101/102 rigs. 250 VDC 
for the HW-12/22/32 rigs.

The early HP-23s used a change in the wiring to get either the 250 or 
the 300 VDC. Later models had a switch on the panel somewhere.

In any case, for the HW-101 it should be set to 300 VDC, NOT 250 
VDC.

I see by your other e-mail that you have the low power output fixed.

Good man!  and good luck! :-)

Ken Gordon W7EKB

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.asp?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html