SB303 Receiver noise.

[Stu Lyon]

If you are not using the SB-303 in a transceiver mode with the SB-401, 
you need to load the -303 LMO output with a 50 Ohm resistor. It's in the 
manual someplace.

Stu, W6CUX


Jim Sutherin wrote:
> I have a sb 303 and a 301, I recall a posting that mentioned how quite the 301 was and they were right. I was wondering if there was any mods or replacements in the 303 front end that could possibly inprove the recievers noise level. I always get a rushing noise when a signal is not present. 
>
>
> Thanks 
> Jim K8DHC
>
>
>   

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html