SB-640 parts needed too

[Pat Bunsold]

As if the SB-110 project wasn't enough to keep my busy for weeks, I also am trying to build a SB-640 Remote VFO from scrap parts.  I scored a cabinet and front panel on Ebay, and had a bezel and dial left over from other messes, but what I need is the chassis and Oscillator coil.  The coil is only needed if someone wanted to use crystal control on freqs instead of VFO control, so that isn't a crisis.  I have begun measuring and trying to figure out how to build a chassis from scrap aluminum, which is very tricky due to the LMO dial and mounting scheme.  I have a metal brake and shear here at work I was so happy in talking them into buying, but even still, manufacturing a chassis with so many intricate bends is a task that would bring tears to a metal shop jobber!  So, does anyone out there  have a scrap chassis for a SB-640 and the coil?
73
Pat WA6MHZ
Crest Radio Museum
--
Pat Bunsold WA6MHZ
San Diego Section Manager
Curator, Crest Radio Museum

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html