K-1 Reproduction (Heathkit All-Wave Beginner's Receiver)

[Ken Ketner]

Greetings Heath fans:

I have resolved to reproduce the Heathkit K-1. I have a good stock of parts from the period. I also have a copy of the book by A.F. Collins in which the radio is featured (THE RADIO AMATEUR 'S HANDBOOK, ninth edition, pages 133 following). This write-up includes the circuit and some isometric views of top and bottom chassis, plus a foto of the front panel in an assembled unit. I could probably make a pretty decent working model from this much information, but I hope to do better, trying to approach the original as much as possible.

I have ordered a manual from Heathkit Ed. Systems, with assistance from "The Ham still at Heath." And Keith has sent me some nice scans of the Collins book pages.

A good next step would be access to someone who has an eyeball on an actual instance of the radio as it came from Heath. Looking at an original would give the following info:

1. Dimensions of chassis and panel, including hole layouts

2. Coil information, including both electrical and mechanical construction.
Also, I have some 6 volt filament power xfmrs, but don't seem to have a 12 volt xfmr. I may have to go modern on this part. Anyone know a good one? The tubes are available from Antique Electronic Supply for very reasonable prices (1.50 and 3.00). It seems a shame to wire up one of the 12A6 beam power tetrodes as a diode for the power supply, But no doubt that was a cheap way to get a power diode in the days of the WWII surplus bonanza.  

3. What punched those nice keyed holes for the tube sockets? I assume a Greenlee or something similar. The Amphenol socket system with the nice wavy ring mount was used, and a plain circle hole will work, but a keyed hole is mo nifty. Are these keyed punches available only on Mars nowadays?

4. Details on the factory cabinet?

5. How to screen a new panel. Are there companies who can create a new screen job on the panel, assuming an original panel can be located or photographed?
 
I will be happy to put together a compendium of information on this project for all to share if I am able to complete it to my satisfaction.

Penson - are you in the net? Got any expert stuff to contribute to this effort?

vy 73,

Ken Ketner
ARS KA5ELD (Extra Class) ARRL, RSGB, GQRP #809
		Personal Webpage: http://www.wyttynys.net
		Office Webpage: http://www.pragmaticism.net
Email:
	home:	ketner(at)arisbeassociates(dot)com
	office: kenneth(dot)ketner(at)ttu(dot)edu

US MAIL
PO Box 65135
Lubbock, TX 79464

-----------------------------------------------------------
Products bought, sold or traded here is the responsibility of the
parties involved.  This list and the City of Tempe are not responsible
for losses or misrepresentations of any kind.  Buyer beware!

-----------------------------------------------------------
This list is a public service of the City of Tempe, Arizona
-----------------------------------------------------------

Subscription control - http://www.tempe.gov/lists/control.aspx?list=HEATH
To post - HEATH at LISTSERV.TEMPE.GOV
Archives - http://listserv.tempe.gov/archives/HEATH.html